 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| FEATURES * 15 WATTS MAXIMUM OUTPUT POWER * SINGLE OUTPUT UP TO 4A * SMALL SIZE AND LOW PROFILE1.0 x 1.0 x 0.39 Inch * HIGH EFFICIENCY UP TO 89% * 2:1 WIDE INPUT VOLTAGE RANGE * SIX-SIDED CONTINUOUS SHIELD * FIXED SWITCHING FREQUENCY * INPUT TO OUTPUT ISOLATION * INDUSTRY STANDARD PIN-OUT FEC15 SERIES COMPATIBLE * CE MARK MEETS 2006/95/EC, 93/68/EEC AND 2004/108/EC * UL60950-1, EN60950-1 AND IEC60950-1 LICENSED * ISO9001 CERTIFIED MANUFACTURING FACILITIES * COMPLIANT TO RoHS EU DIRECTIVE 2002/95/EC APPLICATIONS Wireless Network Telecom/Datacom Industry Control System Measurement Equipment Semiconductor Equipment OPTIONS Positive logic Remote On/Off, Without trim, Without On/Off pin DESCRIPTION LCD15 DC/DC converters provide up to 15 watts of output power in an industry standard package and footprint. These units are specifically designed to meet the power needs of low profile. All models feature with 2:1 wide input voltage of 9-18 VDC, 18-36 VDC and 36-75VDC, comprehensively protected against over-current, over-voltage and input under-voltage protection conditions, and trimmable output voltage. T E C H N I C A L S P E C I F I C AT I O N OUTPUT SPECIFICATIONS Output power Voltage accuracy Full load and nominal Vin Minimum load Voltage adjustability (Note 6) All specifications are typical at nominal input, full load and 25C otherwise noted INPUT SPECIFICATIONS 15 Watts 12V nominal input 24V nominal input 48V nominal input 12V input Input surge voltage 24V input 100mS max 48V input Input reflected ripple current Nominal Vin and full load Nominal Vin and Power up Start up time constant resistive load Remote ON/OFF 12V input Start-up voltage 24V input 48V input 12V input Shutdown voltage 24V input 48V input Input voltage range Remote ON/OFF (Note 7) Positive logic(Option) 9 - 18VDC 18 - 36VDC 36 - 75VDC 36VDC 50VDC 100VDC 30mAp-p 30ms, max. 30ms, max. 9VDC 17VDC 33VDC 8VDC 14.5VDC 30.5VDC 1% 0% 10% 0.2% Single Line regulation LL to HL at Full Load 0.5% Dual 0.2% Single Load regulation No Load to Full Load 1.0% Dual Cross regulation (Dual) Asymmetrical load 25% / 100% FL 5% 20MHz bandwidth See Ripple and noise (Measured with a 1uF M/C and a 10uF T/C) table 0.02% / C, max. Temperature coefficient Transient response recovery time 25% load step change 250uS 3.3V output 3.7VDC-5.4VDC Over voltage protection 5V output 5.6VDC-7.0VDC 12V output 13.5VDC-19.6VDC 15V output 16.8VDC-20.5VDC Over load protection % of FL at nominal input 150%, typ. Short circuit protection Hiccup, automatics recovery GENERAL SPECIFICATIONS Efficiency Isolation voltage Isolation resistance Input to Output Input(Output) to Case See table 1600VDC, min. 1000VDC, min. 9 Open or 3 V < Vr < 15V DC-DC ON Short or 0V < Vr < 1.2V DC-DC OFF Short or 0V < Vr < 1.2V DC-DC ON Negative logic(Standard) Open or 3V < Vr < 15V DC-DC OFF Input current of Remote control pin Nominal Vin -0.5mA~1.0mA Remote off state input current Nominal Vin 2.5mA ENVIRONMENTAL SPECIFICATIONS -40 to +85 (with derating) Operating ambient temperature Maximum case temperature 105C Storage temperature range -55C ~ +125C 18.2/Watt Thermal impedance Nature convection Nature convection with heat-sink (Note 8) 15.8/Watt Thermal shock Vibration Relative humidity MIL-STD-810F MIL-STD-810F 5% to 95% RH EN55022 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 Air 8KV Contact 6KV 10 V/m 2KV 1KV 3 Vr.m.s Class A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A Perf. Criteria A 10 ohms, min. Isolation capacitance 1000pF, max. Switching frequency 400KHz, typ. Approvals and standard IEC60950-1, UL60950-1, EN60950-1 Case material Nickel-coated copper Base material FR4 PCB Potting material Epoxy (UL94-V0) 1.0 X 1.0 X 0.39 Inch Dimensions (25.4 X 25.4 X 9.9 mm) Weight 15g 6 BELLCORE TR-NWT-000332 1.330x10 hrs MTBF (Note 1) 5 5.630x10 hrs MIL-HDBK-217F EMC CHARACTERISTICS EMI (Note 9) ESD Radiated immunity Fast transient (Note 10) Surge (Note 10) Conducted immunity Page 1 of 3 Issued Date2008/05/21 Model Number LCD15-12S3P3 LCD15-12S05 LCD15-12S12 LCD15-12S15 LCD15-12D05 LCD15-12D12 LCD15-12D15 LCD15-24S3P3 LCD15-24S05 LCD15-24S12 LCD15-24S15 LCD15-24D05 LCD15-24D12 LCD15-24D15 LCD15-48S3P3 LCD15-48S05 LCD15-48S12 LCD15-48S15 LCD15-48D05 LCD15-48D12 LCD15-48D15 Input Range 9 - 18 VDC 9 - 18 VDC 9 - 18 VDC 9 - 18 VDC 9 - 18 VDC 9 - 18 VDC 9 - 18 VDC 18 - 36 VDC 18 - 36 VDC 18 - 36 VDC 18 - 36 VDC 18 - 36 VDC 18 - 36 VDC 18 - 36 VDC 36 - 75 VDC 36 - 75 VDC 36 - 75 VDC 36 - 75 VDC 36 - 75 VDC 36 - 75 VDC 36 - 75 VDC Output Voltage 3.3 VDC 5 VDC 12 VDC 15 VDC 5 VDC 12 VDC 15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC 5 VDC 12 VDC 15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC 5 VDC 12 VDC 15 VDC Output Current Min. Load 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA 0mA Full Load 4000mA 3000mA 1300mA 1000mA 1500mA 625mA 500mA 4000mA 3000mA 1300mA 1000mA 1500mA 625mA 500mA 4000mA 3000mA 1300mA 1000mA 1500mA 625mA 500mA Output (4) Ripple & Noise 75mVp-p 75mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 75mVp-p 75mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 75mVp-p 75mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p Input Current No Load 120mA 90mA 40mA 40mA 30mA 30mA 30mA 50mA 65mA 20mA 20mA 20mA 15mA 25mA 40mA 40mA 15mA 15mA 15mA 15mA 20mA (3) Full Load 1375mA 1524mA 1605mA 1506mA 1543mA 1506mA 1488mA 671mA 763mA 783mA 744mA 772mA 744mA 744mA 336mA 372mA 387mA 372mA 386mA 368mA 372mA (2) Eff (4) Capacitor (5) (%) Load max 84 86 85 87 85 87 88 86 86 87 88 85 88 88 86 88 88 88 85 89 88 1000F 1000F 330F 220F 500F 150F 100F 1000F 1000F 330F 220F 500F 150F 100F 1000F 1000F 330F 220F 500F 150F 100F Note BELLCORE TR-NWT-000332. Case 1: 50% Stress, Temperature at 40C. MIL-HDBK-217F Notice2 @Ta=25 C, Full load(Ground, Benign, controlled environment) 2. Maximum value at nominal input voltage and full load. 3. Typical value at nominal input voltage and no load. 4. Typical value at nominal input voltage and full load. 5. Test by minimum Vin and constant resistive load. 6. Trimming allows the user to increase or decrease the output voltage set point of the module. This is accomplished by connecting an external resistor between the TRIM pin and either the +VOUT pin or the -VOUT pin. 7. The ON/OFF control pin voltage is reference to -Vin. The order number please see product standard table. 8. Heat sink is optional and P/N:7G-0047C-F 9. The LCD15 series can meet EN55022 Class A with parallel external capacitors to the input pins. Recommend : 12Vin : 10F /25V 1812 MLCC 24Vin : 6.8F /50V * 2 pcs 1812 MLCC 48Vin : 2.2F /100V * 2 pcs 1812 MLCC 10. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor Power Mate suggest: Nippon chemi-con KY series, 220F /100V, ESR 48m. LCD15-48S05 Derating Curve With Heatsink (Note 4) (Note 8) OUTPUT POWER(%) 120 100 80 60 40 20 0 -40 -20 0 20 40 60 73 80 1. OUTPUT POWER (%) LCD15-48S05 Derating Curve 120 100 80 60 40 20 0 -40 -20 0 20 40 60 68 80 100 120 100 120 AMBIENT TEMPERATURE() AMBIENT TEMPERATURE() LCD15-48S05 Efficiency VS Input voltage EFFICIENCY(%) LCD15-48S05 Efficiency VS Output Load 90 85 80 75 70 65 60 55 50 45 10 20 30 40 50 60 70 80 90 100 EFFICIENCY(%) 92 90 88 86 84 82 80 36 42 48 54 60 66 72 INPUT VOLTAGE(V) OUTPUT LOAD (% of Full Load) Page 2 of 3 Issued Date2008/05/21 Recommended Filter for EN55022 Class B Compliance The components used in the above figure, together with the manufacturers' part numbers for these components, are as follows: C1 LCD1512xxx LCD1524xxx 1. All dimensions in Inches (mm) Tolerance: X.XX0.02 (X.X0.5) X.XXX0.01 (X.XX0.25) 2. Pin pitch tolerance 0.01(0.25) 3. Pin dimension tolerance 0.004 (0.1) LCD1548xxx 10F/25V 1812 MLCC 6.8F/50V 1812 MLCC 2.2F/100V 1812 MLCC C2 N/A C3 10F/25V 1812 MLCC 6.8F/50V 1812 MLCC 2.2F/100V 1812 MLCC C4 & C5 470pF/2KV 1808 MLCC 470pF/2KV 1808 MLCC 1000pF/2KV 1808 MLCC L1 145H Common Choke PMT-051 325H Common Choke PMT-050 325H Common Choke PMT-050 N/A 2.2F/100V 1812 MLCC PIN CONNECTION PIN 1 2 3 4 5 6 SINGLE + INPUT - INPUT ON/OFF +VOUT TRIM -VOUT DUAL + INPUT - INPUT ON/OFF +VOUT COMMON -VOUT Recommended EN55022 Class B Filter Circuit Layout EXTERNAL OUTPUT TRIMMING Output can be externally trimmed by using the method shown below. PRODUCT STANDARD TABLE TRIM UP TRIM DOWN 6 5 RU 5 4 RD Option Negative remote ON/OFF(Standard) Positive remote ON/OFF without ON/OFF pin negative remote ON/OFF without TRIM pin without ON/OFF&TRIM pin positive remote ON/OFF without TRIM pin Suffix -A -B -C -D -E Page 3 of 3 Issued Date2008/05/21 |
Price & Availability of LCD15-12D05
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |